The Mackinac & Other Adventures

Posted on July 14, 2017 by oceanexplorer

I apologize that news of my wanderings and adventures has been so sparse of late. These past few months have been filled with the simple adventure of working at a feverish pace to build things and make a living.

Sailing remains my favorite escape of course, and I do it whenever I can – recently, as part of the crew of Defiance, a J/V 67-footer out of Chicago. We had a great time and posted some impressive wins. This weekend, July 15 and 16, we’ll take on the Great Lakes in the Chicago to Mackinac Race.

You can follow us in Division One on the tracker through the Chicago Yacht Club’s Race to Mackinac website. http://cf.yb.tl/chicagomack2017# Click on the Tracker tab at the top of the page.

Defiance is a powerful boat capable of great sailing and runs with a crew of 14. My challenge this year is to help them become sustainable with recycling and garbage. We will be using reusable water bottles and filtering our own water out of the lake to keep the recycling bag of garbage to a minimum. This not only helps the environment, but also better syncs life onboard with the wonderful world we sail in. Furthermore, it helps Mackinac Island, which has had a recycling and composting program for as long as I can remember. We hope to arrive at the island in 11th Hour Racing style with one bag of garbage and a good finish for Defiance.

(This awesome photo by Maciek Wszelaki, looking aft from Defiance)

For now, it’s a busy day getting packed up and to the boat to finish prep for the Race. I’ll follow up next week with more about August and a wonderful trip scheduled from St. John’s, Newfoundland to Dingle, Ireland, Scotland and ending in Sweden! I’m really looking forward to that!

Good luck to all my friends sailing in the Chicago Mac. After 30 some years, there are quite a few of them now!

And all the best to each of you for a great outdoor summer!

– Dave

Looking Back & Signing off on 2016!

Posted on December 19, 2016 by oceanexplorer

Here on the shores of Lake Michigan, we’ve experienced our first snows, which put an end to the suspense as to when the mild fall would move over so that winter could get on with it. I’m usually fine with snow, at least up to half an inch, but 3 inches forces you to reconsider and put aside the flip-flops and boat shoes. My winter chukkas now sit prominently near the front door.

It was a great summer season, but like most of them, it passed too quickly. With that in mind, there are a few things I’d like to catch you up on.

As most of you know, The Atlantic Cup Race and the Atlantic Cup Kids Program took up much of the first half of my year. It was an amazing experience for me and for the many kids who came down to the docks. I’d like to share with you a new great pro-looking Atlantic Cup Kids program video up now on YouTube. You may notice an older, white-bearded guy rolling the cart and hoarsely singing – that would be me. Forward it or share it and help spread the word!

My personal thank yous go out to the many people who helped with the program, who gave time and energy to the kids, and those of you who supported it financially. We are very grateful for all your support.

This fall, we also learned the Atlantic Cup had accomplished something quite amazing that you won’t read about on the front page of the newspaper; so this time, I’m going to loudly ring our own bell! Owing to the hard work of the entire race staff, led by our sustainability expert, Brian Funke, and with the inspired support of 11th Hour Racing, The Atlantic Cup became the FIRST sporting event in the USA to receive an ISO 20121 certification for sustainability. Let me explain just what this means. The ISO (International Organization for Standardization) develops and oversees an international certification process, which many companies go through to meet or exceed certain performance standards to become ISO accredited companies. It’s a very rigorous certification process and I find it just way cool that The Atlantic Cup, and no other event – not the US Open or Wimbledon, not even Major League Baseball with the Cub’s “green” Wrigley Field, has EVER received this certification.

This is a result of the hard work, commitment and leadership of Julianna Barbieri and Hugh Piggin at Manuka Sports Event Management who run the Atlantic Cup Race as well as the entire staff and all the competitors who each believed in our collective responsibility to serve and maintain our environment. As a proud member of that team, I want to extend my congratulations to everyone associated with the Atlantic Cup. Here’s a link to the whole story: http://www.atlanticcup.org/sustainability

And, if that bar isn’t high enough for you, The Atlantic Cup is also the only regatta world wide to achieve platinum level status in sustainability from Sailors for the Sea – a leading conservation organization that engages with sailing and boating communities toward healing the ocean.

A couple other notable events took place this summer. We had another great Mackinac Race (my 30th) – spending 30 hours sailing from one storm cell to another. I don’t recall seeing so many thunder and rain squalls and rapid wind shifts in any of those previous years. Here’s a video I shot after a night of getting knocked around big time!

Lake Michigan continues to be a seductive and unpredictable demiurge. Today however she looks calm and relaxed, her edges white with the froth of toppling wavelets as she absorbs the spinning snowflakes.

winter_da_550

Back in August, I played the role of Official Observer for Scott Wolford’s world record marathon swim attempt. This young man…(51 years old – Ha!) was planning to set an unassisted, world record of 120 miles by swimming from Chicago to Michigan and back. I was proud to be invited to help with his efforts and record the event for official review.

scott_welford_550
Unfortunately, the weather stopped Scott after about 19 miles, but with the energy he exhibited climbing back on the boat, I’m certain his efforts next summer will produce a new world record.

gino_200

Besides being a crazy good swimmer, Scott is dedicated and committed to teaching children about the environment and clean water. His children’s book, Gino the Minnow is legendary. Check out Gino’s or Scott’s sites on Facebook. Gino the Minnow or Scott Weston Wolford. Now there’s a good Christmas present idea for your kids.

The rest of the summer here on the Great Lakes included a few other races and some very pleasurable sails with friends. My days of late have been filled with various types of work; an article I penned for Sailing Magazine – a kind of beginner’s guide to shorthanded (or single-handed) sailing is right HERE in November’s issue.

Out of the water, a custom-made kitchen cabinet package I designed and built was just installed in a special use residence in Evanston, IL. And then there was Thanksgiving… where as each year for the past 20 or so, my house becomes full of family and friends. It was an especially great year to be together and to be thankful for each other.

We look forward to the coming New Year with great hopes for the completion and publication of my book Spirit of the Dream, which is undergoing final edits. We also hold our hopes high that we will stand up and dedicate our collective energies to tackling the many challenges that our world, our environment, our kids and our families must face.

May your holidays be grand and may our light shine bright in the New Year!

And as the French say, Au Revoir (meaning “until later”)

– Dave and Franklin

Atlantic Cup Kids Wrap-Up!

Posted on August 21, 2016 by oceanexplorer

The Atlantic Cup! What a great way to start off the summer! The race was a great event, the competition was fierce and the camaraderie as always, the best. You can learn more about the race, review the results and see great photos and videos on The Atlantic Cup website. And while racing was the main event, my focus was on the Atlantic Cup Kids Program – and what a great time we had! While it was my first time coordinating the program and much of my days were spent pondering variables and fretting over possible disasters, when the actual events happened, they were just amazing. As one visitor remarked to me, “This is ‘epic!’ – and it was!

I spent the beginning of the year making arrangements, contacting teachers in our three cities to explain our program and visiting classes of kids to talk about the ocean, sustainability and to excite them about the Atlantic Cup and our Kids Program. When it came time for the first actual Kids Day event in Charleston, SC, I was grateful that we had strong plans in place, because that morning, there were nearly 600 students from over 10 schools who came to visit us! It was tremendous sharing the various learning activities and watching the kids take their first steps onto a boat – many of them for the first time ever! John Miller did an amazing job of coordinating and arranging for the students from the Charleston School System to attend – exceeding our limit of 400 students by 50 percent! John explained that no sooner did he open it up for attendance, then he had 600 students sign up… and he had to close down enrollment.

Many thanks to our great staff and our volunteers and the support from 11^th Hour Racing, all of whom rose to the occasion. We had five learning stations— 1) “Whale Blubber and Plankton” run by Sailors for the Seas, 2) “Sustainability” with Brian Funke, 3) “How Boats Float” by Meredith “Megatron” Caroll, 4) “Knot Tying” and 5) “The Ultimate Adventure” – where kids were able to visit one of the boats and talk with the skippers.

group_guys_550

When the day was over and we paused to consider the level of success, it became clear to me that no matter how anxious I was about getting everything right, the sight of so many laughing, inquisitive kids was all the proof I was looking for. Check out our Photo Albums on our Atlantic Cup Kids Facebook Page Photos Page.

As the boats raced into the Brooklyn Marina, so did the Kids program. Brooklyn presented us with something of a challenge. The Marina we had expected to be operating out of was not yet finished with construction, and so we had to move into facilities that prevented us from allowing kids to actually get on the boats. But in spite of that disappointment, the great Atlantic Cup staff, 11^th Hour Racing, the skippers and our volunteers once again put together a great program. Hundreds of fourth graders showed up, even recognizing me as Captain Dave and peppering me with questions. We finished the day giving a group of high school students a better understanding about the inner workings of the marine industry, and where within it, they might pursue vocational opportunities.

Portland, Maine was the last stop of the Atlantic Cup Race and where we had another few hundred kids attend the program. One of the most inspiring parts of the Portland event, were the third grade students from Ocean Avenue School who after spending a semester in an “Expeditionary Learning” program studying lobsters, created an entire station of their own to share their acquired knowledge with us and all the other students. It was very inspiring to watch students teaching other students!

On Day 2 and Day 3 in Portland, while the boats competed on the inshore courses of beautiful Casco Bay, we set up an entire area of the race village dedicated to kids and learning. Here we saw many kids, along with their parents, taking advantage of the interactive learning opportunities, trying their own hand at knot tying, picking up whalebones, learning about sea mammals and the ocean. When all was said and done, over 1000 students took advantage of the 2016 Atlantic Cup Kids Program. And at the end of the race at the Awards Ceremony aboard the replica old Spanish Galleon named El Galeon, we presented the Kids Favorite award to the crew of Talanta.

We were all inspired by these amazing students and by their energetic teachers who helped us to make all this happen. Many of the students we talked with had never been on or even seen a boat before, and only knew about the ocean from school. We’re happy to say we’ve now touched the lives of over 1000 young people and likely helped change the way they will in the future regard their relationship to the oceans that sustain all our lives.

For me, I was most inspired by a young girl who I found looking sad and frustrated at the knot tying station. When I asked her how she was doing, she said she couldn’t tie knots. I asked her if she had tried and she shook her head and looking down said, “I can’t do it.” Together we started with the figure-eight knot. After she accomplished that, we tried the clove hitch and then moved onto the bowline. Each time she tied a knot, her smile grew bigger and more confident. When she finally pulled off the hardest one, the fisherman’s bend, we jubilantly high-fived each other… and I watched her walk away, ready to take on the world! I suspect one day she’ll be one of those who will patiently do the same thing for some other young kid.

Thanks to all of you who followed along and supported our adventures with the Atlantic Cup Kids Program. I hope you enjoyed it as much as we did. As the season progresses here, we’ll find some new avenues to channel our energies and to showcase our educational programs. Stay tuned for more updates on that.

As always, our learning guides are available on BodaciousDreamExpeditions.com under the drop-down menu called “You Explore.” They are also available (in a slightly different format) on the http://atlanticcup.org/Kids page.

And if you haven’t done so already, please like our Atlantic Cup Kids Facebook page. This is useful for attracting sponsors, who can help us to advance our efforts. Who knows, one of those sponsors might be you! Besides that, you’ll see some really cool pics of kids (of all ages) having the time of their lives!

And a special thank you to all who helped out… especially Sam, Anthony (AT), Meredith (Megatron), Julianna, Hugh, Jen, Brittany, Sarah, Jen, Billy, Susan, Michelle and Steve as well as all the skippers, teachers, administrators and the many volunteers who showed up and pitched in with such great enthusiasm. I’m sure I’m forgetting someone … so, thank you too! And big thanks to 11^th Hour Racing for their help and support with The Atlantic Cup and our Atlantic Cup Kids Program.
Until later,
– Dave

P.S. If you know of a school which might enjoy a presentation by Captain Dave about his circumnavigation, the ocean, sustainability, sail-craft and other fun things, please contact me directly at… dave@atlanticcup.org

Atlantic Cup Update – Curious Kids & Racing Ships

Posted on June 8, 2016 by oceanexplorer

I’m writing this from one of my favorite places in the world, the State of Maine! We had beautiful weather this week after a rainy weekend. Hey, it is June in Maine and it is just beautiful out here! And on top of that, today June 9th is our third and final Atlantic Cup Kids Day here in Portland. What a ride it’s been!

The Atlantic Cup once again presented by 11th Hour Racing has been going great! The racing from Charleston ended with a very challenging finish in the light winds and strong currents of New York Harbor. The Spanish entrant, #123 Tales won the leg in a record-beating 72:48:03 finishing 90 minutes ahead of #145 Eärendil (74:21:43), followed 30 minutes later by the all-female team of #118 Oakcliff Racing, with Liz Shaw and Libby Greenhalgh racing my old boat, previously named Bodacious Dream. What a great showing for their first time sailing together!

The race up from New York City (from the Brooklyn Marina more specifically,) to Portland gave the sailors a real workout. After rounding a virtual mark off Nantucket, they sailed downwind in heavy air – 25-30 knots reaching speeds of over 20 knots before the winds eased. Once again Tales II, followed by Eärendil crossed the finish line first.

Equally exciting was watching the finish line from our makeshift race offices as three boats, #95 Talanta, #118 Oakcliff Racing and #128 Toothface entered the inner harbor and jockeyed for third place. In the final few yards, Toothface edged out the others to take third place. Now that was great racing!

Over on Facebook on the Atlantic Cup Kids page, there is a live feed with me commentating on the finish, though our view was distant from the action. We’re not at the professional level yet, but hopefully we’re good enough for you to follow the closing action.

The inshore series begins this Friday the 10th. As far as Kids Days goes, we had a great success in Charleston with nearly 600 kids, Brooklyn brought us well over 100 kids and in Portland, we’re expecting at least 200 kids today – with many more expected for the Inshore Leg on Friday and Saturday at the race village in Ft. Allen Park.

Among the exciting things in store for Kids Day will from Presumscott School’s 3rd grade students, who have been studying lobsters this semester and will be presenting their resulting program for us. I’ll have more on that soon. One interesting thing I just learned from these students is the Gulf of Maine is warming up faster than any other body of water in these latitudes.

Our office here on the Maine Wharf is in the middle of the working waterfront of Portland, Maine right next to a beautiful tall ship named El Galeón from Spain.

The waters surrounding us here are those of Casco Bay, and its estuary where the fresh rivers waters meet the ocean and its tides. The great interaction between the two bodies of water creates a rich and nutritious environment for sea life.

portland-head-light I’ve prepared a work sheet on the Casco Bay region based on some great information from the very knowledgeable Abby Doane over at Friends of Casco Bay. It’s amazing how important the unique environments of each of the harbors we’ve sailed from are to the overall health of the ocean. Read my Education Guide about Casco Bay – which you can find RIGHT HERE!

So, as we move into the last phase of the Atlantic Cup, for which I’m a proud ambassador for 11th Hour Racing, I very much appreciate so many of you following along with us, learning with us and helping us move our activity-based learning agenda forward into the future. I only wish I could share with each of you the enthusiastic laughter and great questions from the kids who toured our race villages.

Stay tuned for another update after the end of racing on Saturday. It promises to be an exciting final leg. In the meantime, please take a minute to visit the Atlantic Cup Kids page and vote for your favorite team! We have a great trophy for the “Fan Favorite” to present at the awards presentation on Saturday.

And then head on over to our Atlantic Cup Kids Facebook page… and catch up on the posts and photos since the start of the race on May 28th. And while you’re there, LIKE us if you like … so you can stay in the loop moving forward!

Until later…
– Capt. Dave

Casco Bay Estuary/ Portland, Maine

Posted on June 8, 2016 by oceanexplorer

Portland, Maine is surrounded by legendary Casco Bay, which marks both the finish line of the second leg of the Atlantic Cup Sailing Race which began in Brooklyn, NY – and also the site the final two days of inshore course racing.

Portland is Maine’s largest metropolitan area and home to 25% of the state’s population. Casco Bay, the water around Portland is an estuary, defined as the tidal mouth of a river where fresh water streams of rivers mix with tidal waters of the ocean. Three major rivers, the Fore River, Royal River and Presumscott River along with many smaller streams are the sources which feed fresh water into the Casco Bay Estuary.

Bound by Cape Elizabeth, Cape Small and Half Way Rock, the entire watershed embraces 42 different local communities and is designated as one of 28 “Estuaries of National Significance.”

In 1631, the first English settlers arrived on the Portland Peninsula, which was called Machigonne by the indigenous peoples. 150 years later, George Washington commissioned the building of the Portland Lighthouse. To this day, the oldest lighthouse in Maine shines seaward 24 miles and guides sailors from all corners of the world, not the least of whom are the 2016 Atlantic Cup competitors who hail from Spain, Sweden, France, England and the United States.

Atlantic Cup sailors know intimately how important ocean health is and the Casco Bay region is a prime example of an amazing, healthy cycle of diversity that coexists with the Atlantic Ocean. It is home to over 850 species of marine life from microscopic plants and animals to migrating birds, seals and pilot whales.

Because of this, these waters are known as the “Nursery of the Sea” – where baby marine animals can find shelter and food in the nutrient rich waters. In the spring, over 50 islands in Casco Bay provide shelter to over 150 species of water birds and their newly hatched young. Is it any wonder that I love it so.

For most of the 1800’s and 1900’s, there have been environmental pressures on the Casco Bay Region. Industries found the flowing rivers convenient for disposing their waste. Chemicals used for tanning horse hides to make leather, lead used in the canneries and metal foundries and the spillage of coal and gasoline all found their way into the water and still remain to this day in the soils of the river beds. Today, nitrates from farm fertilizers, storm water runoff, sewage and ocean acidification continue to pose threats to the health of the estuary.

Fortunately, effective education initiatives and conscientious citizenship such as that practiced by the “BayKeepers” – who are part of an incredible group called “The Friends of Casco Bay.” Check out their site to learn more how they are working to tackle these challenges and help us all be better stewards of our environment.

The beautiful Maine coast with its deep forests of spruce, pine, fir and many deciduous trees has long been a haven for summer visitors. The many island and granite shorelines provide beautiful landscapes for lobster dinners and clam bakes. Swift tides ranging from 12 feet to 30 feet constantly flush and wear away at the granite shoreline, cleansing the waters, and yet the ever-present pressure imposed by mankind continues to challenge the ocean’s natural ability to renew itself.

The Atlantic Cup Race, presented by 11th Hour Racing expends a significant effort to maintain a carbon neutral footprint through its recycling and sustainability practices, making it second to no one in the world of yacht racing and professional sports. Check out this video from 2013, when the whole sustainability issue in racing was first introduced.

We hope if you are there for the inshore leg of the race, that you will take notice of the powerful and beautiful Casco Bay that surrounds you.

Ocean Learning Unbound!

Posted on May 18, 2016 by oceanexplorer

We’re in the thick of it now! With so much to do for the Atlantic Cup Kids program, time has really been flying by quickly. The start of The Atlantic Cup Race is less than 10 days away and our first group of students will be visiting the race village in Charleston, SC a week from now! In Charleston alone, we have scheduled over 500 students to visit the race village and boats! That’s an epic leap forward!

In early May, I visited six schools in Charleston to inspire and to be inspired by hundreds of kids. I talked to 15 different classes over two days! It was great to see how much they already knew about weather, oceans and science – and how insightful their questions for me were.

Carolina Dreamer Project on Display at the Science Fair

One class in particular, Amy McMahon’s, had done something extraordinary. On May 17, 2015, they launched a small unmanned boat named Carolina Dreamer (to the right in the above photo) out across the Atlantic. Each day along the way, the students tracked its progress on satellites, checked the weather along the course and did many of the same calculations I did while sailing Bodacious Dream around the world. At a certain point, they lost contact with the boat, until it was spotted on February 10, 2016 off the coast of Wales, retrieved and sent back to Charleston. Now that was an inspiring tale, which you can read about right HERE!

In response to the enthusiasm and curiosity I’ve encountered around the ocean and boats, I’ve pulled together some thoughts on what is required on the design and budding side that enables racing boats to sail the way they do… with a focus on the physics, chemistry, math and engineering that goes into getting a boat into competitive shape for a race like the Atlantic Cup.

To help me with this, I engaged my friend Merf Owen, a noted naval architect and the designer of two of the boats in the Atlantic Cup to talk about his life and how he came to be a racing yacht designer.

:: Check out the story called “How Boats Sail” as well as “An Interview with Merf Owen – Naval Architect” at their respective links.

A number of the high school students who will visit us in the race village in Brooklyn/NYC and Portland, ME have already expressed their interest in pursuing careers in the marine industry. It’s really an eye-opener when you realize just how many different disciplines are involved in the design, building, maintaining and sailing of modern boats – from engineers and builders to shippers, accountants, business managers and computer specialists. Reading Merf’s interview you’ll see the interesting path he took to becoming one of the best. He also shares what subjects he feels students who want to ready themselves for marine careers should pay closest attention to in school.

So, stay tuned. It will be a busy month ahead! And if you haven’t done so yet, please LIKE our Atlantic Cup Kid’s Page on Facebook. Also check out Carolina Dreamer’s (Educational Passages) Facebook Page and LIKE it for those amazing kids.

Also if you go to the Atlantic Cup Kid’s Page, you can VOTE for your favorite boat and team in this year’s race, where The Atlantic Cup Kids will be presenting the trophy for the Fan Favorite!

More to come! Heading to Charleston early next week!

– Dave (along with a host of friends & students!)

How Boats Sail!

Posted on May 18, 2016 by oceanexplorer

There are few things more beautiful than the sight of a sleek boat full sail skimming across the water. But how does it all work? How do nature, science and human design come together to enable a sailboat to move in so fluid a way?

From ancient times onward, using wind power to move boats required being tuned into the ways of nature and how its many forces might be harnessed to serve human purposes. To that end, boat builders have always relied on observation and calculation, tradition, testing and passed down refinements to build their boats.

Today though, with all the incredible advances in physics, engineering, computing technology and material science, boat building (and especially racing yacht building) has become a most exciting and cutting edge industry.

To help us get up to speed on boat building today, I asked an old friend of mine, one of the world’s top racing boat naval architects, Merf Owen of Owen Clarke Designs to field some questions about his life designing boats.

You can find my whole interview with Merf RIGHT HERE, but for now, let’s imagine that I asked Merf to design a new Class 40 racer – to say, compete in the Atlantic Cup – a vessel much like the Class40 I sailed around the world a few years ago.

Merf would first want to know how I intend to race the boat and where in the world I plan on sailing it? My answers to these questions help provide him with guidelines for particular factors he will need to consider in designing my boat. When he learns where I want to sail the boat, he will ask a meteorologist (a weather scientist,) to study the weather patterns in those areas and so provide him with weather data (percentages of light, medium or heavier winds and the general wave patterns resulting from them.) Merf will use this information to optimize the design for those regions of the world and for the type of sailing and racing I want to do.

Once Merf has gathered the information he needs, he designs the shape of the hull and the “sail plan.” The hull of course is the “body” of the boat, and the sail plan is the combination of mast and sails and rigging that “power” the boat. He must align his design to the laws of physical science laws in arriving at the best shape for the hull, so that it will move through the water and waves with the least amount of “drag,” to avoid anything that slows a boat down – (like dragging your feet while riding your bike.)

One hundred years ago, a boat designer would carve the model of a boat from a wooden block – using their experience and creative instincts to determine the best shape of the hull. This model would then be converted into hand-drawn blueprints. Today, computers automate much of this process, but Merf still must exercise his intuitions and creativity to course-correct the computer output he receives.

As Merf progresses with his design of the hull shape and sail plan, he can test his work using powerful computer simulation software, which shows him where modifications might help to improve performance. When he’s happy with the design, Merf emails his digital designs to the builder and the fun of boat building can commence!

OCD_Class_40_Deck_P2

Once the builder reviews the design drawings, there’s much that needs to happen. You can just imagine the many things they have to figure out, and how many of them require a solid understanding of mathematics.

How much space do they need in their shop to build the boat and parts? How many layers of fiberglass cloth will be needed? How many gallons of epoxy resin? How many screws? How many people will they need to hire? How long will it take? How much is it going to cost? All of this is must be carefully figured out in order to develop a solid project plan that includes realistic cost estimates.

Once the build plan is in place, more advanced math or “engineering” phase comes into play. First the builders have to build molds in which the boat parts are cast. These molds have to be engineered strong enough to withstand people moving them around and walking on them as the boat is being built. While science, math and engineering are requirements for getting all of this correct, seasoned builders also rely on practical or “seat of the pants” engineering to build the best and strongest molds.

Once building begins, technical engineering drives the process. Structural engineers and designers figure out the details of the composite structure – the number of layers of fiberglass cloth that offer the strength to handle the “loads” (weight and forces) that various parts of the boat must support.

Here again, an understanding of physics is necessary. A rope or “line” turning through a block is a good example. The line pulls a lot of weight and when it turns around a pulley, it changes the direction of the load. The pulley has to withstand these loads and not break loose from its mounting. All these loads and attendant forces have to be calculated so that the size of the block, bolts and composite materials can withstand these always changing loads.

halyard_200 An even more complex set of calculations is necessary when it comes to the mast, which must support the power of the sails through the supporting cables called “shrouds.” There are many calculations to consider in how the shrouds spread the loads across the entire hull. All this has to be worked out so the boat and mast won’t fail in a powerful storm, yet still remain light enough to be competitive on the racecourse. There are always trade-offs to consider between strength and weight when making these important calculations and decisions.

Once construction of the hull begins, workers lay the layers of fiberglass cloth in the mold and then a lightweight core of balsa wood followed by additional layers of cloth to meet the stated engineering requirements. A layer of plastic is then laid over the mold and the edges sealed, at which point a vacuum pump sucks all the air out of the mold. This forces the materials together tightly as an injection system pumps epoxy resin into the mold, filling in the voids and soaking the cloth.

resin

In a few hours, the chemical reaction of the liquid epoxy hardens, creating the strong, hard shell of the boat. To further strengthen the epoxy, the whole boat is put into a large oven and “cooked” at a specific temperature for a period of time. Chemical engineers figure out the specific formulations of the epoxy resins, the temperatures they work at and the time it takes them to harden.

The mast and sails require similar engineering and science know-how. Sails are designed to work like the wings of an airplane – only vertically instead of horizontally. Most people think the wind just blows a boat along, but this isn’t exactly correct. It is the shape of the sails that produces power by allowing the wind to flow along the cloth thus creating pressure differences, which actually “pull” the boat toward the wind. Nowadays, the sails are made from composite plastics and the engineering of their strength and flexibility so that they can bend with the forces of the wind and sails and not break. The mast itself is made in a similar way as the hull of the boat, with cloth and epoxy resins.

Bodacious Dream When the body of the boat is complete, the real fun can begin. The mast and boom, the sails and the rigging are mounted and the boat is launched. Finally, it’s time to take it test sailing to see how the sailplan and the rest of the boat work together.

Once on the water, powerful onboard computers receive signals from multiple sensor devices that monitor everything from the angle and speed of the wind to the shape of the sails and the speed of the boat. These numbers are compared with computer-generated models to determine how well the boat is performing. Even with all this technical help though, the human sailor still must make the strategic refinements necessary for the boat to outpace its competitors and win a race.

2495_Nav_Screen_1000

An experienced sailor today must master many skills. They must be conversant in many subjects before they can compete in a race like the Atlantic Cup. They need to have learned meteorology and how to anticipate changes in wind directions and speeds. They need enough knowledge of oceanography so that they can track currents and tides and how they dynamically shift and flow around a harbor or coast. They must have also learned how to work with computers so they can program, interpret and manage all the information the computers are capable of providing. And of course they must know their math and engineering, so they can keep the boat moving safely. Some good handyperson skills come in real handy too when called upon to fix things that break in the middle of a race (or when far from land.)

Bringing a boat into existence takes the work of many people with many different skills. Designers like Merf lead teams of skilled engineers, scientists and builders who all take pride in the building of fast and beautiful boats. And finally, there are the sailors, who use their wide range of technological skills and sailing instincts to help them win races like the Atlantic Cup.

Dragon, which Merf designed and will be co-skippering in the Atlantic Cup

Next time you hear your teachers (or parents) talk about the importance of STEM (Science, Technology, Engineering and Mathematics) education – you will be able to relate that to how it applies to the artful science of boat building.

SCIENCE: Weather science, chemical science, computer science, human physiology science
TECHNOLOGY: Computers, monitoring instruments, sail designs and shapes
ENGINERERING: Computers, composites, hardware, pulleys, loads, masts, sails and building
MATHEMATICS: Lots and lots of math. Numbers, computer calculations, engineering load calculations, speed calculations, parts and construction time calculations, cost and business calculations. Endless Math! (The more math you’re able to do in your head, the easier it will be to make these decisions.)

An Interview with Merf Owen, Naval Architect

Posted on May 18, 2016 by oceanexplorer

Dave Rearick of Atlantic Cup Kids interviews Merf Owen, Sailor, Naval Architect and Yacht Designer and principal of Owen/Clark Design, LLC.

Dave Rearick (DR): How old are you now Owen, and when did you get interested in sailing?

Merf Owen (MO): I’m 53 and I first started sailing with a sail training organization called the Ocean Youth Club, when I was 16. I was brought up in the middle of England, far from the sea, but before I left school I had decided I would join the Navy, but I’d never been to sea really. So, I thought I had better do some sailing. My first few days at sea were spent in a very famous storm (in Europe) during the Fastnet Race of 1979.

DR: Where is your home office?

MO: I live in Hamble in England, but my company’s office is three hours away in Dartmouth and we also have an office in New Zealand. The Internet is what helps us to all be able to work together and share a working environment and communicate over thousands of miles and many different time zones.

DR: Your work has you travelling and sailing all around the world, how much do you travel?

MO: I spend a lot of time on the West Coast and East Coast of the United States for business and pleasure. In one year I am only in Hamble perhaps 6 months maximum. The rest of the time I’m in the US, Europe and Australia meeting clients, sailing or going to boatyards/conferences etc.

DR: Do you remember a moment in your life where you got your first big sailing break? The first chance to crew on a hot racer, a meeting with a famous sailor or something like that? Can you tell just a bit about how it inspired you?

MO: The first break was sailing with the Ocean Youth Club… it changed my life. My first big break racing was sailing as navigator on the 85’ catamaran Novell Network with an English skipper called Peter Phillips. We took part in the Round Europe Race in 1985. I was twenty two… and inspired by sailing alongside some of the greatest sailors of their generation… Robin Knox Johnston, Phillip Poupon, Serge Madec, Tony Bullimore…. also Peter Phillips himself, who almost won (but came third in the end) in the 1980 Single-handed Transatlantic Race from Plymouth England to Newport RI. He was beaten by Frenchman Phillip Poupon. It was very special to be around these guys on the dock. I thought after this I would be a professional sailor… but I had to make a choice between careers and I chose design and engineering.

DR: I know you sailed the predecessor to the Volvo Ocean Race…

MO: No, I was a skipper on the BT Global Challenge 1996/97, at the time called the Whitbread Race.

DR: What boat did you sail and how did you get the chance to compete in the Whitbread?

MO: My boat was Global Teamwork. I got the chance by applying for the position of skipper with race organiser Sir Chay Blyth, who I knew from my days multihull sailing. Chay had won the double-handed transatlantic race and was the first man to row the Atlantic Ocean. I applied for the job by an email using satellite communication, the same day as I rounded Cape Horn for the first time with another old friend of mine I met racing multihulls. Alan Wyn Thomas. I’m a strong believer that a sailing life and life in general is about meeting people, being stroked by them and stroking others in return. I am from the middle of England, far from the sea, no one in my family sailed and my father was a train driver. I was lucky with the people I met, but I also made the effort to go out and meet people. I think this is important for young people to know: There are a lot of good people out there who will and can help, but you need to go out and not be afraid to ask, get dirty, start at the bottom, and work hard for what you want… that’s the American way too isn’t it?

DR: When did you get interested in Yacht Design and what course of study did you pursue to become a yacht designer?

MO: I left the Navy and put myself through college… to study naval architecture (submarine design actually) with Royal Corps Naval Constructors at University College London. It was during this time, sailing and racing other people’s boats that I began to gain confidence and begin to think that I could design something better than the boats I was sailing.

DR: Are there particular classes a young student should pay particular attention to if they want to pursue yacht design and engineering?

MO: Maths, Physics, computer studies… but you need to get out on the water too. I would never employ a designer/engineer who either does not sail or has not worked as a boat-builder. Yacht design is not just a theoretical engineering subject. One needs passion and the two most passionate types of people I know are boat builders and sailors. Even if you’re not a great engineer/mathematician, there can be a place for you in a yacht design office if you’ve other skills.

DR: In the years you’ve been designing, can you talk us through a simple history of the changes you’ve seen?

MO:I think the students will find it interesting how far technology has come in the 30 years since I started designing boats at the beginning of the commercial computer age. Although my business partner has ‘drawn’ boats I never have. I used an early Apple computer…an SE to produce the geometry, the line drawings, using an early version of the MaxSurf software that we still use.

Engineering was undertaken with Lamanal Software using a Sirius computer I bought from a company called SP. It was very advanced at the time and cost a lot of money. It used actual Floppy discs – 5.25 inch which could hold 600 KB of information. Amazing eh? Jumping forward thirty years and my laptop is many times more powerful than the Cray super-computer I used at University to develop software in Fortran 77. Nowadays the performance orientated yacht designer’s armory of hardware and software on our laptops is comprehensive. We have the ability to model using computational fluid dynamics, weather, performance analysis and engineering that only an America’s Cup team would have had even ten years ago.

DR: How many Class 40 designs have you done and how many of your designs are in the Atlantic Cup this year?

MO: We have just signed a contract on our sixteenth Class 40 that will be built in South Africa. In the Atlantic Cup this year we have two of our boats racing… Dragon, one of our oldest boats, built in 2008 and Longbow, which is a new boat built last year in Rhode Island.

DR: Longbow is your most recent Class 40 design. You designed it specifically for the Atlantic Cup. In simple terms a person without detailed knowledge would notice, what makes it different?

MO: Class 40 began in Europe where the target races are mainly Trans-Atlantic from East to West. Racing sailboats rely on wind to power them. How fast they go, depends on how they perform changes with the different speeds and angles to the wind that they sail. If you sail across the Atlantic from West to East, instead of from West to East, then it’s possible to design a different kind of boat, one that is faster in those winds. Also, on average in the ocean, in the middle of the Atlantic the wind is stronger than it is on the east coast of the United States. Since all the Class 40s designed and built in Europe were designed for the Atlantic Races, we thought it would be a good idea to design Longbow just for the races it will do on the East coast of the USA. The owner of Longbow just wants to race in America, not across the Atlantic… so the boat is specifically designed for the local conditions. It is faster in the light winds that are a feature of sailing in the summer along the Eastern Seaboard between Charleston and Portland.

DR: What do you think makes a boat a good design?

MO: All good sailing boats are easy to sail, hold their direction when sailing with the minimum of input from the sailor/helmsman. We also like our boats to be “pretty”, although beauty is different in the eye of different people. We often use the following phrases when talking with clients/boat builders/journalists. These are phrases that are well-known to describe design, and we are not the first to use them:

“Function follows form…. which means if it looks right, it ‘probably’ is right.”

At the same time as the above, we’re engineers/technicians as well so we also believe that those who fall in love with practice but without science are like a sailor who steers a ship without a helm or compass, and who never can be certain whither they are going. And the great Nat Hereshoff invented a word when he urged designers to: “Simplicate and add lightness.”

DR: Why do the Class 40’s have two rudders when other boats only have one?

MO: Class 40s are so wide that when they heel over in the wind, if they had only one rudder in the middle it would come out of the water and make the boat impossible to steer.

DR: Most people will notice these boats are very wide, what is the reason for this?

MO: Most racing sailboats historically have been designed to a rule that limits the width of the boat and also the performance. Class 40 comes from a genre of design which has a history of unrestricted rule… it’s called “Open Class.” Wider, in general, is faster… so long as there’s enough wind to match the sailplan of the boat and keep it ‘powering along.’

DR: Are the boats considered light for their size?

MO: Yes, they are… not super light because the rule limits their construction to glass fibre… to save cost. They could be lighter if they were built from carbon fibre… nevertheless, compared to your average sailboat, they are light.

DR: How fast can the Class 40’s go?

MO: I have sailed at 22 knots, but I know boats in certain conditions have sailed at 25 knots and even 30 knots… which is 29-35 mph.

DR: What has been the most exciting project you have worked on designing boats?

MO: So many exciting projects and not all of them racing boats… it’s hard to pick one because they’re all exciting and often for different reasons. People you work with also add excitement, as well as the kind of boat. At the moment, we’re working on a high -latitude cruising boat that will visit the Antarctic and the Arctic and it’s built out of aluminium, not carbon fibre. It’s a very exciting project. Of course, my first boat… a 35’ racing trimaran was an amazing project. I’m still best of friends with the three people who helped me build that boat and one of them is my business partner. Kingfisher, our first Open 60 was designed and built in New Zealand for a young girl… Dame Ellen MacArthur (from the middle of England, much like myself). That was an amazing project, both because of the technology and the people. Our eight and most recent Open 60, Acciona was the first racing boat of its type to circumnavigate the Globe without having any carbon/fossil fuels onboard… just solar and water-generated energy… a cool project. And let’s not forget Longbow… a great project, working with good people and a great owner to create a very special and innovative sailboat. It was fun too building her right here in the United States.

DR: I’m sure the computer and CAD drawing has changed your work… what exciting technologies do you hope these young students watching the Atlantic Cup will develop to make the job of yacht designing even easier and boats even better?

MO: 3D printing is beginning to make a difference in how we present projects to a client. Five years ago we were able to use it, at great cost, to show a client what a 40m cruising boat would look like. Today a workable size printer sells for $3000, and we’re just about to buy one for the office. In the future I’m sure we’ll be able to walk clients though a holographic image of a design, either in our office, at the boatyard or at their home. I hope this happens before I retire!

DR: Thanks so much Merf!

Earth’s Oceans – Learnings & Celebrations

Posted on April 20, 2016 by oceanexplorer

Well, it’s down to the last month before the beginning of the Atlantic Cup Race! Things are heating up as the organizers of the race are excitedly putting all the pieces in place for the start of the competition in Charleston, South Carolina on May 28th.

There are some exciting new entrants that have been added since my last update, including Liz Shaw and Libby Greenhalgh – the first all-female team – which is a super exciting first for this race. Also, I have it on good source that there are even a few more competitors to be announced soon! So, stayed tuned for that or follow the Atlantic Cup on their Facebook page, as well as following us on our newly launched Atlantic Cup Kids Facebook page.

The quality and the size of this year’s field, is going to make it very difficult to pick which boat I want to vote for as my favorite. Once you review the entrants, I hope you’ll consider casting a vote for your favorite. Speaking from experience, I can tell you it’s a big boost to the sailors to have folks rooting for them in that way. You can easily cast your vote on the Atlantic Cup Kids Page.

I’ll break down the competition more in my next update. In this one, I want to share a bit more about our live learning events that will take place at all three of the race harbors.

Charleston, South Carolina, where the race begins is providing us with a huge warm welcome for their Kid’s Day, which will be May 26th. We’ve got over 500 kids scheduled to visit us so far. This really charges me up – the idea of having 500 unique opportunities to engage young, growing minds to learn more about the ocean and how we co-exist with it more sustainably. After all, the ocean covers 75% of the surface of our planet. We are connected to it (and a part of it) at the most fundamental of levels.

So, in early May, I’ll be visiting John Miller, who is helping us round up the kids and classes through the Charleston School District. At that time, I will have a chance to visit and talk with some of the classes prior to the Kid’s Day event at the harbor.

A couple of weeks ago, I made a similar visit to Portland, Maine and received a very enthusiastic response to our presentation and program. I met with a great group of dedicated local folks who call themselves “BayKeepers” and who are part of a wonderful group called “The Friends of Casco Bay.” Check out their site to learn more.

While in Portland, I also visited three schools. It’s not easy to keep your presentation on track when the kids are peppering you with more questions than you have time to answer! Many thanks to the teachers and students at Bayview, Ocean Avenue and Hall Schools for allowing me to spend time with them. With Kid’s Day 1 in Portland full to capacity, we’re looking for more local schools and kids programs to join us on Kids Day 2 where the highlight will be watching the inshore racing from Ft. Allen Park. Of all the places I’ve sailed and raced, this location promises to be one of the best ever for watching boats race. So, let me know if you are familiar with schools in any of the three cities that might want to come down to the harbor and join the fun.

Our stay in New York City at the end of Leg One is going to be great too. We’ve got a lot of high school kids visiting us there which is challenging me to find more advanced math, science and engineering learning points with which to engage them. Fortunately, sailing is filled with so many opportunities to expand your knowledge and understanding. Anyone care to explain the trigonometry involved in celestial navigation? Or how about determining the working loads of various winches, blocks and lines? The list of things to learn is endless.

Since much of our program is about the oceans, we’ve also uploaded a NEW Education Guide to the Atlantic Cup Kids Page – an updated version from Bodacious Dream Expeditions that we call “Ocean World.” There’s a wealth of information there about the amazing world of the ocean. It’s a great and fun read and we encourage you to share it (along with the other Guides on that same page) with the kids in your world.

When I’m on the water, I have this wondrous experience of feeling more directly connected to points all around the world. A few bags of groceries and I can go anywhere I want. From Charleston to France is a couple weeks. From there to South Africa a month. Then there’s New Zealand, Japan, China, Russia, Italy, Germany, India, Indonesia, Alaska, Peru… and on and on you go. Where would you like to go if you were setting sail on an ocean adventure? Drop me a note at Dave@AtlanticCup.org and tell me your dream port-of-call.

So, that’s it for now. Come visit us at the Atlantic Cup Kids Facebook page. I recently posted a cool visual explanation of one of my favorite things… bioluminescence. And while you’re there, give us a LIKE if you haven’t already done so, so that as we move forward, we can keep you in the loop. … More exciting stuff coming soon.

– Cap’n Dave …
with trusty Franklin by my side! (For those of you who’ve been asking where he’s been.)

P.S. And you can sign up for Kid-specific Mailings at the newsletter signup and by selecting AtCup KiDS News! We’ll start sending those closer to the race.

Atlantic Cup… Big News & Views…

Posted on March 26, 2016 by oceanexplorer

It’s been quite a while now since I last updated you. Winter arrived, the holidays passed and soon the snows will pass too and behind them, spring, along with that ol’ sailing spirit, will rise again!

Going back in my own memory, the spring of 2012 and 2013 were marked for me by the excitement of the Atlantic Cup Race… and this year will be no different! The Atlantic Cup is coming up soon (May 23rd – June11th) but this year with a few notable changes. Starting again in Charleston S.C., the first leg will still end in New York City, but the second leg instead of ending in Newport RI will conclude in Portland, ME, where the inshore leg will happen. This course change will add a whole new challenge for the race competitors as they negotiate the coastal waters of Cape Cod on their way to Portland.

The other change, and a very exciting one for me, is that this year I’m heading up the Atlantic Cup Kids Program. I won’t be racing the Atlantic Cup this year. Instead I will be getting kids, students, parents and teachers up-to-speed and excited about all that’s happening. We want them of course to follow the race, to get to know teams and to come visit the Race Villages, but in addition we are also going to expand the broad educational agenda that began while we were sailing around the world. We hope to help inspire kids to embark upon their own journey to learn about the sport of sailing, but also about oceans, the environment and how they might live a more sustainable lifestyle as they grow into young adults and the leaders of tomorrow.

We’re all grateful at the Atlantic Cup for our friends at 11th Hour Racing who once again are the presenting sponsors. I’ve had an amazing time being one of the “Ambassadors” for this insightful and inspiring organization.

So, here are some things to watch for and some actions you might take to help me share the Atlantic Cup Kids Program with young people everywhere and specifically with the young people in your life.

1. We’ve started a new Atlantic Cup Kids Facebook page – so please go there and “like” the page. Liking it is a helpful pat on the back for us and will also keep you informed with updates to your Facebook timeline.

118 2. Check out the enhanced Atlantic Cup Kids Page on the Atlantic Cup website. There you will find a fine of set of Education Guides in place and new ones like the just published Wind and Weather guide, which in the time leading up to the race will be followed by other new guides. In addition, from the AC Kids page you can also find information on the sailing teams, and vote for your favorite team! Also, you will find a link to sign up for the AtC Kids mailing list which will get you news and updates in your email inbox.

3. Reach out and help the kids in your life navigate the guides and contents of the AC Kids Page and the Facebook page, so that they can learn and follow the race on their own.

4. If you know of teachers, adult mentors, scout leaders or other kids groups, please spread the word and point them to our pages. We want to make this information fun, valuable and available to kids everywhere, especially to those living inland and out of sight of the oceans.

5. If you’re in Charleston, New York City or Portland or will be during the Atlantic Cup stopovers, please come on down and visit the race village. If you know of schools in those areas, contact them here by email so that they can visit and take part in the great activities we have planned for visitors and kids.   Here’s a video of kids visiting in Charleston, SC in 2014.

Thank you for lending whatever support you can to our efforts.   So then, let’s get on and talk about the race itself!

Many of you have told me how exciting Atlantic Cup Class 40 racing is and how much fun it was to watch Bodacious Dream come to life on the race tracker. I fondly remember getting calls in the middle of the night from friends telling me they couldn’t get off the computer watching us eek out another close win. This year, we expect the racing to be just as exciting.

There are a couple of brand new boats which will challenge each other to showcase their designer’s talents, along with our old friends on their proven rides. Some of the boats to watch for are Longbow 143, a brand new boat from Merf Owen and the Owen Clark Design Team. Tales II 123, a brand new boat from Botin Design in Spain and Campagne de France, a brand new design from the Anglo-Franco team of Halvard and Miranda. I’m excited to see these new designs sail but will also be rooting for old friends on equally fast boats… Pleiad Racing 39 and Dragon 54. Toothface II 128 and Ahmas 127, both third generation Akilaria’s will be battling for a podium place alongside the full field of nine boats. And, I’d be remiss if I didn’t mention, my favorite, ol’ #118 will be back, skippered this time by sailors from Oakcliff Sailing. It’s going to be a great year on the water.

I know I’m going to miss the racing, but I’m going to have more than my hands full with energized kids hungry to learn more about the ocean, weather, sea life as well as the many real dangers the ocean faces and that threaten its future sustainability.   Helping the oceans back to better health is a mission we can and should all embrace.

So, please take a minute to like the kids Facebook page and to sign up for email updates from the Atlantic Cup Kids Page… and let’s take the kids sailing, racing and learning together.

Thanks to everyone!
– Dave

P.S. For those of you who have wondered, I have been working steadily on the book about my solo circumnavigation sailing adventure, and I’m happy to say it’s almost done! Stay tuned!

BDX

Ocean Learning Adventures

The Mackinac & Other Adventures

Looking Back & Signing off on 2016!

Atlantic Cup Kids Wrap-Up!

Atlantic Cup Update – Curious Kids & Racing Ships

Casco Bay Estuary/ Portland, Maine

Ocean Learning Unbound!

How Boats Sail!

An Interview with Merf Owen, Naval Architect

Earth’s Oceans – Learnings & Celebrations

Atlantic Cup… Big News & Views…